PET SE II Series

Ultra-large shot weight

Large diameter screw increases the injection stroke and the injection volume is about 50% larger than the standard machine.

Efficient and high-performance screw

The design of low shear and large length-diameter ratio increases the plasticising efficiency by more than 30%, and effectively reduces acetaldehyde level.

Strong ejector design

The ejector force is about 40% larger than the ordinary machine, and the ejector stroke is 10-40mm longer.

Multi water channels of large pipe

Equipped with 15-23 groups of mould cooling water channels to shorten the cooling time and improve the transparency of the preform.

Large torque hydraulic motor

Stable and continuous output of high torque to meet the requirement of high speed plasticising for PET.

Excellent plasticising effect

It ensures the high transparency of the ordinary preform. Raw materials of even colour is attainable when mixing with masterbatch, toner and colour oil.
Materials of a larger proportion of recycled plastics can be also evenly plasticised.

Stable and precise injection

Wear- resistant tip set and quality position transducers are provided.

Excellent energy saving effect

Compared to the use of traditional machines, an electricity reduction up to 60% is possible with the use of precise and high efficient servo gear pump together with the low resistance hydraulic channel.Heating of hydraulic system is also better controlled.